| Composition | AISI 316L stainless steel body |
| Power supply | 24 Vdc (10 ÷ 35 Vdc) current loop 4 ÷ 20 mA (2 wires) |
| External connections | MIL-C-5015 2 poles connector (conductors max section 2,5 mm²) |
| 4 poles M12 connector | |
| Environmental | - 60°C ÷ + 120°C |
| IP 65 EN 60529/10.91 standards | |
| Measure type | Omnidirectional seismic (absolute vibration) |
| Dynamic field | ± 18 g |
| Transverse sensitivity | < 5 % |
| Linearity | ± 2% - 75 Hz |
| Dynamic performances | ±3% / 10Hz – 1kHz - see Figure 2 |
| -3db / 1.5Hz – 2.5kHz | |
| Insulation | ≥108 Ω between signal and container |
| Application axis | Any |
| Standard machine connection thread | M8x1,25 |
| ¼”-18NPT | |
| ¼’’-28UNF | |
| M6x1 | |
| Maintenance | No maintenance is needed |
| Electrical connections | Bipolar shielded cable, conductors typical section 2x1mm² |
| Parameters to be defined when ordering | Measuring field - Machine connection thread - Certification - Connection |
| Mounting torque | 5÷10 N-m |
| Certification available | Ex II 2 G Ex ia IIC T6, T5, T4 Gb (ATEX) - Ex ia IIC T6, T5, T4 Gb (IECEx) |
TR-26 Vibration Transmitter
4-20mA Absolute vibration transmitter IP65 SS316 body with onboard 2 pin connector for machinery online monitoring
The integrated vibration transmitter TR-26 measures the absolute vibrations of any rotating machine support
The transmitter, secured directly on machinery, generates an electric signal (4÷20 mA) which is proportional respectively to vibration velocity or acceleration.
The transmitter is made of an AISI 316L body with machine connection thread; the connection to the acquisition system is effected by means of a MIL-C-5015-2 poles connector.
NOTE: The transmitter is available in different configuration versions and does not need any set-up or maintenance.
TR-26 monitors vibration of the point where fixed and interfaces directly to PLC/DCS 2 wires current loop. It is available with different certifications:
- Intrinsecally safe Atex,
- TP TC, IECEx.
- CSA/UL HazLoc
The transmitter is certificate SIL 2 for functional safety
Technical Specification