Product Detail:
The TR4101 is a cost-effective solution for monitoring the radial vibration on the shaft of balance of plant machines. The TR4101 combines the proximity probe driver and the signal conditioning circuit into one package. It works with a proximity probe and extension cable as a system.
Electrical
Power Supply:
16-30VDC
Frequency Response (±3dB):
2.0 - 3,000Hz
Probe and Cable:
5 meter or 9 meter proximity probe and extension cable
works with 5mm, 8mm, and 11mm probes
Proximity probe includes: TM0180, TM0105, TM0110, 3300, 7200 and 990 series
Sensor Linear Range (reference with AISI 4140 steel):
5mm, 8mm probe: 2.0 mm (80mil)
Approximately 0.25mm (10mil) to 2.25mm (90mil)
11mm probe: 4.0mm (160mil)
Approximately 0.4mm (15mil) to 4.4mm (175mil)
Overall Vibration:
4-20mA
2-wire, load
Buffered Output/ GAP:
Original vibration, un-filtered
Nominal: 2-18VDC
Impedance: 20 kΩ
Maximum cable distance: 3.0m (10ft)
Sensitivity: 8.0mV/um (200mV/mil) nominal
Maximum Load:
50×(Vs-16)
Where Vs is the system power supply
Isolation:
> 500Vrms; circuit to case
System OK:
System OK: output 4-20mA
System Not OK: output < 3.6mA
Physical
Height: 75mm (2.95”)
Weight: 0.5 kg (1.0 lb)
Environmental
Temperature:
Operation: -40℃ to +70℃
Storage: -40℃ to +100℃
Humidity:
90% non-condensing