Product Detail:
The TR4102 is a cost-effective solution for monitoring the axial position or phase reference on balance of plant machines. The TR4102 combines the proximity probe driver and the signal conditioning circuit into one package. It works with a proximity probe and extension cable as a system.
Features
- Loop powered transmitter
- Does not require proximity probe driver
- Buffered output/ GAP
- Compatible with other manufacturers’ proximity probes (5mm, 8mm and 11mm)
- Aluminum cast case (copper free) with epoxy potting for better environmental protection and reliability
- Same size as a proximity probe driver
Specifications
Electrical
DCS or PLC Power Supply:
16-30VDC
Sensor Interface:
Special 95Ω coaxial cable with connector
Probe:
5mm, 8mm, and 11mm probes which includes: TM0180, TM0105, TM0110, 3300, and 7200 series
Sensor Linear Range (reference with AISI 4140 steel):
5mm, 8mm probe: 2.0 mm (80mil)
Approximately 0.25mm (10mil) to 2.25mm (90mil)
11mm probe: 4.0mm (160mil)
Approximately 0.4mm (15mil) to 4.4mm (175mil)
4-20mA Transmissions:
2-wire, load
Phase reference: frequency response: 0 - 10 KHz
(G02 and G03)
Buffered Output (GAP V):
Raw position signal
Nominal: 2-18VDC
Impedance: 20KΩ
Maximum cable distance: 3.0m (10ft)
Sensitivity: 8mV/um (200mV/mil) nominal
Frequency response: 0 - 10 KHz
Maximum Load:
50×(Vs-16)
Where Vs is the system power supply
System Self-test:
System OK: output 4-20mA
System Not OK: output < 3.6mA
Physical
Height: 75mm (2.95”)
Weight: 1.0kg (2.0 lbs)
Environmental
Temperature:
Operation: -40℃ to +70℃
Storage: -40℃ to +100℃
Humidity:
90% non-condensing