The model 910.27 flushing ring is mounted between the diaphragm seal (either flange-type or cell-type design) and the process flange using standardised sealings.
The flushing ring is available with one or two flushing bores located at the side. Deposits, especially those on the diaphragm, can be removed by flushing and cleaning in order to avoid any impairment of the measurement.
Flushing rings with mounted valves extend diaphragm seal systems so that maintenance can be carried out with them still fitted.
Measuring location calibration without dismounting
By using the flushing ring with mounted valves and an upstream shut-off valve, calibration can be performed on-site.
In its product portfolio, WIKA has the calibration equipment needed for this, e.g. precision digital pressure gauge, model CPG1500, and also the required pressure generation e.g. hand pump, model CPP30 or model CPP1000-H.
WIKA
Endress + Hauser
Gruppo Aturia
Pressure Gauge
Temperature Gauge
Flowmeter
Ultrasonic
Magnetic
Pressure Transmitter
Temperature Transmitter
Pressure Sensor
Pressure switch
Level Transmitter
Temperature Switch
API Pump
UL Listed
FM Approved
Fire pump
PV Combiner Box
Control Valve
