Stainless Steel Gas Flow Turbine Meter :: 150mm ID
Gas Flow Turbine Meter:: 150mm ID
S1::Range 32 – 650 m3/Hr
S2::Range 50 – 1000 m3/Hr
W::Range 80 – 1600 m3/Hr (Extended option)
W::Range 80 – 1600 m3/Hr (Extended option)
Stainless Steel Construction
Click “Specification” for Connection options / Accessories
The GLFT Gas Flow Meter is an Inferential measurement device suitable for monitoring dry gases and air flows. Each unit is individually calibrated for guaranteed accuracyof volumetric flow, with the option of compensated mass measurement via the optional flow computer
and meter mounted pressure and temperature sensors. These Rugged flow turbines feature a low pressure drop design and dynamic step change response to changes in flow.
Features ::
Performance
⊗ Repeatability: ±0.2%
⊗ Accuracy: Standard: ±1.5% of reading;
⊗ Optional: ±1% of reading
⊗ Max Temperature -20 to +80 Deg C
⊗ Ambient Temp -20 to +60 Deg C
⊗ Max Temperature -20 to +80 Deg C
⊗ Ambient Temp -20 to +60 Deg C
Wetted Components
⊗ Housing: Standard – 304 SS (Optional) 316 Stainless Steel
⊗ Bearings and Shaft: 304 Stainless Steel
⊗ Rotor: ABS (Corrosion Resist) or Aluminium-Alloy
⊗ Retaining Rings: 304 Stainless Steel
Output Signal: (Where applicable)
⊗ Sensor: Pulse signal mV Sinwave (Coil)
⊗ Sensor: Pulse Signal Amplified Voltage Square Wave (OC)
⊗ Transmitter: 4 to 20 mA DC current signal
Wide choice of displays available with features including Batch Control, Flow Curve Linearisation,
Ratio Control, Compensated Flow readings, Hi/Low Alarms and various communications protocols