|
Temperature
|
|
|
Measuring range
|
-40 … +85 °C
|
|
Accuracy
|
± 0.1°C @ -40 ... +85 °C @ moved air > 2 m/s
|
|
Rel. Humidity
|
|
|
Measuring range
|
0 … 100 % rel. Humidity
|
|
Accuracy
|
Typ. ± 1,5 % r. H. @ 25 °C and < 80 % r. H.
1,5 % r. H. over the complete measuring range |
|
Air pressure
|
|
|
Measuring range
|
300 … 1200 hPa
|
|
Accuracy
|
± 0.25 hPa @ -20 … +80°C @ 800 … 1100 hPa
± 0.50 hPa @ -20 … +80°C @ 600 … 800 hPa |
|
Interface
|
|
|
Type
|
RS 485 HD
|
|
Output
|
RS 485 HD; 0 ... 1 V; 0 ... 10 V; 4 ... 20 mA
|
|
Data format
|
8N1
|
|
Baud rate
|
2400 ... 57600 Baud
|
|
Operating voltage
|
|
|
Battery connection
|
6 ... 30 V DC - type dependent
|
|
General
|
|
|
Ambient conditions
|
-40 ... +85 °C
0 ... 100 rel. humidity, including condensation |
|
Current load
|
type dependent
|
|
Housing
|
Stainless steel
|
|
Protection
|
IP 67 (applies to the total sensor)
|
|
Dimension
|
Ø 20 x 166 ... 200 mm - type dependent
|
|
Weight
|
aprox. 0.45 kg
|
Temperature Measuring Technology 1.1006.54.xxx
This sensor is above all intended for use at meteorological measuring stations for connection to data logger systems. Thanks to its universal interface the sensor can also be used as a single solution in every application suitable for the purpose.
The interface to the device is digital and consists of an RS485 interface in half duplex mode. In conjunction with ID-based communication the interface enables operation of the sensors in a bus system.
Two data protocols are available:
• ASCII (THIES format)
• Binary (MODBUS-RTU)
In addition to the digital interface, the transmitters with article numbers 1.1006.54.x4x and 1.1006.54.x6x have 3 analogue outputs which can be configured as a current or voltage output. The digital output can be used simultaneously with the analogue outputs.
The sensor is equipped with a integrated pressure sensor, as well as a replaceable hygro-thermo module for the capture of air temperature and relative humidity.
The replaceable hygro-thermo-module and the pressure sensor are factory adjusted and cali-brated. The sensor is supplied without a filter cap. The hygro-module is protected with its own white membrane. The sensor thus offers excellent dynamic behaviour. PT1000 measuring element is used for temperature measurement.
For outdoor installation we recommend the use of the weather- and thermal radiation shield.
Order no.: 1.1025.55 xxx or a forced ventilation weather and radiation protection with the order no. 1.1025.80.101.
Technical Specification
Download