| Composition | AISI 316L stainless steel integrated transmitter body |
| Power supply | 24 Vdc (10 ÷ 35 Vdc) current loop 4 ÷ 20 mA (2 wires) |
| External connections | Standard: PVC shielded cable with nickel-plated brass cable gland |
| Special: EFTE shielded and armoured cable, with AISI 316L steel cable gland | |
| Transmitter - 60°C ÷ + 120°C | |
| IP 68 (submersible depth 70 mt) | |
| Environmental | Standard cable: - 20°C ÷ + 80°C |
| Special cable: - 60°C ÷ + 150°C - resistance UV | |
| Measure type | Omnidirectional seismic (absolute vibration) |
| Dynamic field | ± 18 g |
| Transverse sensitivity | < 5 % |
| Linearity | ± 2% - 75 Hz |
| Dynamic performances | ±3% / 10Hz-1kHz - see Figure 2 |
| -3db / 1,5Hz - 2kHz | |
| Insulation | ≥10⁸ Ω between signal and case |
| Application axis | Any |
| Standard machine connection thread | M8x1,25 |
| ¼”-18NPT | |
| ¼’’-28UNF | |
| M6x1 |
TR-27 Vibration Transmitter – CEMB
4-20mA Absolute vibration transmitter IP68 – SS316 body with intgrated cable
Wide range of operation allows the application on any tipology of rotating machine (as fans, compressors , centrifuges , turbines)
Operation range TR-27 monitors vibration of the point where fixed and interfaces directly to PLC/DCS 2 wires current loop. The integral cable, length to be defined, guarantees the maximum degree of seal for application in hard environments.
NOTE: The vibration transmitter is available in different configuration versions and does not need any set-up or maintenance.
Technical Specification