| Composition | Transmitter with provision for fastening to a DIN guide |
| TR-A interfaceable with accelerometers with a sensitivity of 100 mV/g (TA-18 – TA-18/S) | |
| TR-V interfaceable with velocimeters with a sensitivity of 21.2 mV/mm/s (T1-40 – T1-40V – T1-40BF – T1-38 – T1-38V – T1-38BF) | |
| TR-VMT interfaceable with velomitor TV-22 (3,94 mV/mm/s) | |
| Power supply | 24 VDC nominal |
| 18-30 VDC for 2-wire version | |
| 24-35 VDC for 3-wire version | |
| External connections | Terminal strip for connection to a PLC/DCS (2- or 3-core screened cable, max. cross-section 2.5mm²) |
| Terminal strip for connection to a transducer (2- or 2-core screened cable, max. cross-section 2.5mm²) | |
| BNC for connection to an analyser | |
| Operating temperature range | 35°C ÷ +70°C |
| Type of measurement | Absolute vibration |
| Dynamic performance | 5 ÷ 10.000Hz |
| Linearity | ± 2% over the entire measurement range and within the operating temperature limits |
| Insulation | ≥10⁸ Ω between signals and container |
TR-A TR-V TR-VMT Vibration Monitoring
Absolute vibration monitoring Transmitter with provision for fastening to a DIN guide
The TR-A/V/VMT transmitter connected to a dedicated transducer (accelerometer, velocimeter or velomitor) measures absolute vibration of any machine support and is capable of directly interfacing with an acquisition system (PLC or DCS) in 2-wire (4-20 mA current loop) or 3-wire technique
- GENERAL DESCRIPTION
- The TR-A/V/VMT vibration monitoring device processes the signal coming from the transducer connected to it and converts it into a proportional analogue signal at the measured magnitude.It can be installed in a secure area and connected by means of certified barriers to intrinsic safety transducers positioned in a classified area.
It comes complete with terminal strips for connection to a power supply, input and output signals and a BNC for connection to an analyser.
Technical Specification
Download